Products
-
Sportline Motorcycle Oil SAE 20W-50 – 12/1 Quart Case
SPORTLINE 20W-50 4-Stroke Motorcycle Engine Oil is formulated with a new additive technology for all liquid or air-cooled gasoline 4-stroke high performance street and racing motorcycles. This technology protects not only the engine, but the transmission and clutch system, insuring smoother shifting, protection against slipping, and long drive system life.
-
Sportline Motorcycle Oil SAE 50 – 12/1 Quart Case
SPORTLINE SAE 50 4-Stroke Motorcycle Engine Oil is specifically formulated with anti-wear characteristics that extend engine life and protect against oil breakdown at high temperatures in older Harley-Davidson? V-twin engines.
-
Sportline Motorcycle Oil Synthetic V-Twin SE 20W-50 – 12/1 Quart Case
SPORTLINE V-Twin Synthetic 20W-50 Motorcycle Engine Oil is an advanced four-stroke synthetic motorcycle oil for outstanding protection in four-cycle, V-Twin type engines – particularly those that are air-cooled and tend to run hotter than other types of engines. Designed to help provide the proper frictional characteristics necessary for wet-clutch common engine/transmission systems, delivering unsurpassed performance under severe race operation, air-cooled operating conditions and in any driving condition, from mild to severe such as racing.
-
Sportline Petro ATV SAE 10W-40 – 12/1 Quart Case
SPORTLINE ATV Genuine 4-Stroke 10W-40 Motor Oil is petroleum engine oil is formulated with shear stable polymers, high performance base stocks and a new generation of high-tech, state-of-the-art detergent, dispersant and anti-wear additive package designed to meet the lubrication demands of today’s high performance ATV engines, transmission and clutches.
-
Sportline Synthetic ATV/UTV SAE 0W-40 – 12/1 Quart Case
SPORTLINE ATV/UTV/SNOWMOBILE SYNTHETIC 4-STROKE SAE 0W-40 is a full synthetic motor oil compounded with a specially formulated additive system to ensure the ultimate in performance, protection and maximum horsepower 4-Cycle All-Terrain Vehicle (ATV), Utility Vehicle (UTV), Snowmobile, Motorcycle and 4-stroke Outboard engines.
-
Sportline Synthetic ATV/UTV SAE 10W-40 – 12/1 Quart Case
SPORTLINE ATV/UTV/SNOWMOBILE SYNTHETIC 4-STROKE SAE 10W-40 is a full synthetic motor oil compounded with a specially formulated additive system to ensure the ultimate in performance, protection and maximum horsepower 4-Cycle All-Terrain Vehicle (ATV), Utility Vehicle (UTV), Snowmobile, Motorcycle and 4-stroke Outboard engines.
-
Sportline Synthetic ATV/UTV SAE 10W-50 – 12/1 Quart Case
SPORTLINE ATV/UTV/SNOWMOBILE SYNTHETIC 4-STROKE SAE 10W-50 is a full synthetic motor oil compounded with a specially formulated additive system to ensure the ultimate in performance, protection and maximum horsepower 4-Cycle All-Terrain Vehicle (ATV), Utility Vehicle (UTV), Snowmobile, Motorcycle and 4-stroke Outboard engines.
-
Sportline Synthetic ATV/UTV SAE 5W-30 – 12/1 Quart Case
SPORTLINE ATV/UTV/SNOWMOBILE SYNTHETIC 4-STROKE SAE 5W-30 is a full synthetic motor oil compounded with a specially formulated additive system to ensure the ultimate in performance, protection and maximum horsepower 4-Cycle All-Terrain Vehicle (ATV), Utility Vehicle (UTV), Snowmobile, Motorcycle and 4-stroke Outboard engines.
-
Sportline Synthetic ATV/UTV SAE 5W-40 – 12/1 Quart Case
SPORTLINE ATV/UTV/SNOWMOBILE SYNTHETIC 4-STROKE SAE 5W-40 is a full synthetic motor oil compounded with a specially formulated additive system to ensure the ultimate in performance, protection and maximum horsepower 4-Cycle All-Terrain Vehicle (ATV), Utility Vehicle (UTV), Snowmobile, Motorcycle and 4-stroke Outboard engines.
-
Sportline Synthetic ATV/UTV SAE 5W-50 – 12/1 Quart Case
SPORTLINE ATV/UTV/SNOWMOBILE SYNTHETIC 4-STROKE SAE 5W-50 is a full synthetic motor oil compounded with a specially formulated additive system to ensure the ultimate in performance, protection and maximum horsepower 4-Cycle All-Terrain Vehicle (ATV), Utility Vehicle (UTV), Snowmobile, Motorcycle and 4-stroke Outboard engines.
-
STA-VIS DUROL 541 Heavy Duty Cutting Fluid – 55 Gallon Drum
STA-VIS DUROL 541 Heavy Duty Cutting Fluid is a light-colored, active sulfur chlorine-lard oil, compounded to provide the optimum lubricity and anti-weld properties for the most demanding metal working jobs. The special sulfur-chlorine additives react with metals at tool point temperatures and pressures to form sulfide and chloride films. These low-shear films reduce the resistance to cutting, resulting in lower torque and power requirements, lower temperatures, elimination of chip welding, good surface finish and long tool life.
-
STA-VIS DUROL 541 Heavy Duty Cutting Fluid – 6/1 Gallon Case
STA-VIS DUROL 541 Heavy Duty Cutting Fluid is a light-colored, active sulfur chlorine-lard oil, compounded to provide the optimum lubricity and anti-weld properties for the most demanding metal working jobs. The special sulfur-chlorine additives react with metals at tool point temperatures and pressures to form sulfide and chloride films. These low-shear films reduce the resistance to cutting, resulting in lower torque and power requirements, lower temperatures, elimination of chip welding, good surface finish and long tool life.
-
STA-VIS DUROL ML410/Honing Oil – 5 Gallon Pail
STA-VIS DUROL ML410/Honing Oil is a high quality cutting fluid containing chlorine and fatty additives for use in machining non-ferrous alloys or honing operations. Light in color which allows excellent work piece visibility. The low viscosity base oil ensures rapid heat dissipation and quick drainage from finished pieces and chips resulting in lower oil consumption. Because of its very special balance of additives, it will provide extreme pressure performance but will not corrode machine parts of fine finished work and will not stain metals such as aluminum, copper or brass.
-
STA-VIS DUROL ML410/Honing Oil – 55 Gallon Drum
STA-VIS DUROL ML410/Honing Oil is a high quality cutting fluid containing chlorine and fatty additives for use in machining non-ferrous alloys or honing operations. Light in color which allows excellent work piece visibility. The low viscosity base oil ensures rapid heat dissipation and quick drainage from finished pieces and chips resulting in lower oil consumption. Because of its very special balance of additives, it will provide extreme pressure performance but will not corrode machine parts of fine finished work and will not stain metals such as aluminum, copper or brass.
-
STA-VIS EP Industrial Gear Lube 100 – 5 Gallon Pail
STA-VIS EP Industrial Gear Lube 100 uses sulfur-phosphorous type additive technology, blended with high quality oil base stocks to provide outstanding oxidation stability, high viscosity index, and a high flash. The special sulfur-phosphorous additives react with the metallic surfaces to form films which have high load carrying properties and anti-wear characteristics. Additional additives provide excellent rust preventive and anti-foam characteristics, and superior water separation, and excellent stability in storage and use. These additives are non-corrosive to steel, brass and bronze.
-
STA-VIS EP Industrial Gear Lube 100 – 55 Gallon Drum
STA-VIS EP Industrial Gear Lube 100 uses sulfur-phosphorous type additive technology, blended with high quality oil base stocks to provide outstanding oxidation stability, high viscosity index, and a high flash. The special sulfur-phosphorous additives react with the metallic surfaces to form films which have high load carrying properties and anti-wear characteristics. Additional additives provide excellent rust preventive and anti-foam characteristics, and superior water separation, and excellent stability in storage and use. These additives are non-corrosive to steel, brass and bronze.
-
STA-VIS EP Industrial Gear Lube 150 – 5 Gallon Pail
STA-VIS EP Industrial Gear Lube 150 uses sulfur-phosphorous type additive technology, blended with high quality oil base stocks to provide outstanding oxidation stability, high viscosity index, and a high flash. The special sulfur-phosphorous additives react with the metallic surfaces to form films which have high load carrying properties and anti-wear characteristics. Additional additives provide excellent rust preventive and anti-foam characteristics, and superior water separation, and excellent stability in storage and use. These additives are non-corrosive to steel, brass and bronze.
-
STA-VIS EP Industrial Gear Lube 150 – 55 Gallon Drum
STA-VIS EP Industrial Gear Lube 150 uses sulfur-phosphorous type additive technology, blended with high quality oil base stocks to provide outstanding oxidation stability, high viscosity index, and a high flash. The special sulfur-phosphorous additives react with the metallic surfaces to form films which have high load carrying properties and anti-wear characteristics. Additional additives provide excellent rust preventive and anti-foam characteristics, and superior water separation, and excellent stability in storage and use. These additives are non-corrosive to steel, brass and bronze.
-
STA-VIS Formkote #100 – 5 Gallon Pail
STA-VIS Formkote #100 has been manufactured exclusively for the prevention of all types of poured concrete from adhering to the forms. Keeps wood, steel, plastic coated, aluminum, paper, and fiberglass forms free and clean of concrete buildup and rust. It is an amber, nontoxic, light viscous liquid which is laboratory controlled for easy application with commercially available sprayers. It has bland, pleasing odors and is soluble in all proportions with aliphatic, aromatic, or chlorinated solvents. Formkote #100 is a concentrated form of Formkote #7, and should be diluted at 10:1 with solvent, kerosene or diesel fuel.
-
STA-VIS Formkote #100 – 55 Gallon Drum
STA-VIS Formkote #100 has been manufactured exclusively for the prevention of all types of poured concrete from adhering to the forms. Keeps wood, steel, plastic coated, aluminum, paper, and fiberglass forms free and clean of concrete buildup and rust. It is an amber, nontoxic, light viscous liquid which is laboratory controlled for easy application with commercially available sprayers. It has bland, pleasing odors and is soluble in all proportions with aliphatic, aromatic, or chlorinated solvents. Formkote #100 is a concentrated form of Formkote #7, and should be diluted at 10:1 with solvent, kerosene or diesel fuel.
-
STA-VIS Formkote #7 – 5 Gallon Pail
STA-VIS Formkote #7 has been manufactured exclusively for the prevention of all types of poured concrete from adhering to the forms. Keeps wood, steel, plastic coated, aluminum, paper, and fiberglass forms free and clean of concrete buildup and rust. It is an amber, nontoxic, light viscous liquid which is laboratory controlled for easy application with commercially available sprayers. It has bland, pleasing odors and is soluble in all proportions with aliphatic, aromatic, or chlorinated solvents. Ready to use formula.
-
STA-VIS Formkote #7 – 55 Gallon Drum
STA-VIS Formkote #7 has been manufactured exclusively for the prevention of all types of poured concrete from adhering to the forms. Keeps wood, steel, plastic coated, aluminum, paper, and fiberglass forms free and clean of concrete buildup and rust. It is an amber, nontoxic, light viscous liquid which is laboratory controlled for easy application with commercially available sprayers. It has bland, pleasing odors and is soluble in all proportions with aliphatic, aromatic, or chlorinated solvents. Ready to use formula.
-
STA-VIS Heat Transfer Oil – 5 Gallon Pail
STA-VIS Heat Transfer Oil is special blend of solvent refined, paraffinic base oils, containing effective oxidation, rust, and corrosion inhibitors. Its excellent resistance to oxidation minimizes the formation of sludge, tar, and coke deposits which interfere with fluid circulation and efficient heat transfer. Low pressure minimizes fluid loss due to evaporation, vapor locks, and hazards of flammability; and is non-corrosive to aluminum, brass, bronze, copper, and steel.
-
STA-VIS Heat Transfer Oil – 55 Gallon Drum
STA-VIS Heat Transfer Oil is special blend of solvent refined, paraffinic base oils, containing effective oxidation, rust, and corrosion inhibitors. Its excellent resistance to oxidation minimizes the formation of sludge, tar, and coke deposits which interfere with fluid circulation and efficient heat transfer. Low pressure minimizes fluid loss due to evaporation, vapor locks, and hazards of flammability; and is non-corrosive to aluminum, brass, bronze, copper, and steel.
-
STA-VIS PAR 189B – 5 Gallon Pail
STA-VIS PAR 189B is a corrosion inhibitor designed for the manufacture of non-staining, dry to the touch, rust preventive with water displacing properties and fingerprint suppression. STA-VIS PAR 189B contains oxidized wax based off barium. Method of application may be by dip, spray or brush at normal room temperature. Once applied, a tenacious film bonds to the metal, preventing black rust from forming if the metal parts are touching in storage. Can easily be removed with standard cleaning practices.
-
STA-VIS PAR 189B – 55 Gallon Drum
STA-VIS PAR 189B is a corrosion inhibitor designed for the manufacture of non-staining, dry to the touch, rust preventive with water displacing properties and fingerprint suppression. STA-VIS PAR 189B contains oxidized wax based off barium. Method of application may be by dip, spray or brush at normal room temperature. Once applied, a tenacious film bonds to the metal, preventing black rust from forming if the metal parts are touching in storage. Can easily be removed with standard cleaning practices.
-
STA-VIS STA-KOOL Heavy Duty 110 – 5 Gallon Pail
STA-VIS STA-KOOL Heavy Duty 110 is a heavy duty water emulsifiable cutting and grinding fluid. It is designed to fit the all-purpose needs of both large and small plant operations. Emulsions will not stain common cast and extruded grades of aluminum. Additives provide excellent tool life and finishes that have traditionally only been associated with straight cutting oils. Combining the good features of a compounded cutting oil with those of regular water emulsions produce a fluid with maximum cooling ability, excellent lubricity and anti-wear properties.
-
STA-VIS STA-KOOL Heavy Duty 110 – 52 Gallon Drum
STA-VIS STA-KOOL Heavy Duty 110 is a heavy duty water emulsifiable cutting and grinding fluid. It is designed to fit the all-purpose needs of both large and small plant operations. Emulsions will not stain common cast and extruded grades of aluminum. Additives provide excellent tool life and finishes that have traditionally only been associated with straight cutting oils. Combining the good features of a compounded cutting oil with those of regular water emulsions produce a fluid with maximum cooling ability, excellent lubricity and anti-wear properties.
-
STA-VIS SYN-KOOL D 601.01 – 5 Gallon Pail
STA-VIS SYN-KOOL D 601.01 is a high quality metalworking fluid recommended for medium to heavy duty machining of high carbon-steel and alloyed special steels with high tensile strength. Syn-Kool D 601.01 is a micro-emulsion, synthetic blend, with a high level of EP-additives, rust inhibitors, biocide package, and a defoamer, and is recommended for medium to heavy duty CNC machining and milling of all types of steel alloys. Also suitable for sawing and grinding operations including creep feed grinding. Excellent results are also achieved in (band) sawing applications on steel alloys. Can be used on ?yellow metals? without staining.
-
STA-VIS SYN-KOOL D 601.01 – 55 Gallon Drum
STA-VIS SYN-KOOL D 601.01 is a high quality metalworking fluid recommended for medium to heavy duty machining of high carbon-steel and alloyed special steels with high tensile strength. Syn-Kool D 601.01 is a micro-emulsion, synthetic blend, with a high level of EP-additives, rust inhibitors, biocide package, and a defoamer, and is recommended for medium to heavy duty CNC machining and milling of all types of steel alloys. Also suitable for sawing and grinding operations including creep feed grinding. Excellent results are also achieved in (band) sawing applications on steel alloys. Can be used on ?yellow metals? without staining.